Operation - EGO POWER+ SP1000 Operator's Manual

OPERATION

WARNING:
Remember that a careless fraction of a second is sufficient to inflict serious injury.
APPLICATION
You may use this product for the purposes listed below:
 Supplying power for operating compatible USB electronics when the output power
of the solar panel reaches 18W.
 Supplying power to EGO Nexus power station or other compatible EGO power
stations for energy storage when the output power of the solar panel meets the
required input power of the connected power station.
SETTING UP THE SOLAR PANEL
(Fig. 2)
1. Disengage the buckles to unfold the
solar panel (Fig. 2a).
2. Prop up the solar panel with support
legs (Fig. 2b).
3. Adjust the support legs to position so
that the solar panel is perpendicular to
the sunlight (Fig. 2c).
NOTE:
To use the solar panel in midday sun, you may simply place it flat on the
ground.
2b
Support Legs
10
100W SOLAR PANEL — SP1000/SP1000-FC
Do not allow familiarity with this product to make you careless.
2a
PRESS
Buckles
2c
90°