Levoit Aura, LTM-A401S-WU - Smart Thermostat Manual

Package Contents

1 x Aura Sensor
1 x Wall Bracket
1 x Desktop Stand
2 x AAA Battery (Pre-Installed)
1 x User Manual

Specifications

Battery	2 x 1.5V AAA Batteries
Power Supply	3V
Dimensions	2.40 x 1.84 x 0.86 in / 6.10 x 4.67 x 2.18 cm
Weight	0.15 lb / 0.07 kg
Connectivity	Zigbee™ 3.0
Temperature Display Range	32°–122°F / 0°–50°C Temperature Display Accuracy: ±1°F during 32°–122°F ±0.5°C during 0°–50°C
Temperature Increments	0.1°F / 0.1°C
Relative Humidity Display Range	1–99% Humidity Display Accuracy: ±3% during 20–80% humidity ±5% during 0–99% humidity
Relative Humidity Increments	1%
Max Connectivity Distance	Indoor: 164 ft / 50 m Outdoor: 492 ft / 150 m Note: Outdoor distance is measured in a straight line without obstacles.
FCC ID (Inside Battery Compartment)	2ARBY-AS041S

Compatibility

• Levoit Aura™ Smart Thermostat

Note: To access additional smart functions, download the free VeSync app.

READ AND SAVE THESE INSTRUCTIONS

SAFETY INFORMATION

Please read and follow all instructions and safety guidelines in this manual.

General Safety

• Keep out of reach of children.
• Do not tamper with the sensor's internal components.
• Do not dispose of any part of the sensor in a fire.
• Do not submerge or place the sensor in direct contact with water or any other liquid.
• Not for commercial use. Household use only.

Use & Care

• When installing or changing batteries, make sure to place the batteries in the correct polarity.
• Using batteries that are not alkaline may shorten the operating time of the sensor.
• Do not mix new and old batteries.
• Do not replace batteries while hands are wet or while the sensor is in a wet environment.
• If the sensor is not in use for an extended period of time, remove the batteries to conserve battery life and extend sensor lifetime.

Function Diagram

1. Battery Compartment
   
2. FCC ID and 4-Digit Code (Inside Battery Compartment)
3. Wall Bracket
   
4. Desktop Stand
   

Display Diagram

Connectivity Signal

is displayed when the sensor is connected to the Aura Smart Thermostat.

Note: You must first connect the sensor to the VeSync app in order to pair it with the smart thermostat (see Connecting the sensor to the VeSync app).

Humidity Comfort Level

Displays Comfort, Low, or High depending on the humidity that's detected by the sensor.

Getting Started

Installation

The Aura Sensor can be used by itself, or with the Aura Smart Thermostat.

Note: To access smart features, the sensor must be connected to the VeSync app and the smart thermostat.

When using the sensor with the smart thermostat, make sure the sensor is no more than 164 ft / 50 m away from the thermostat.

If there are obstructions between the sensor and smart thermostat like dividing walls, different floor levels, and furniture, move the sensor closer as these may affect the sensor's connectivity.

Note:

• Before first use, remove the battery pull tab from the sensor's battery compartment. [Figure 1.1]
  
  Figure 1.1
  
• Take a picture or write down the 4-digit code in the battery compartment of the sensor. This will be used later when connecting multiple sensors to the VeSync app.

Hanging the sensor on a wall

Note: The wall bracket is difficult to remove from the wall once it is placed. Make sure the sensor is in range of the smart thermostat before placing it on the wall.

1. Attach the wall bracket to the back of the sensor. [Figure 1.2]
   
   Figure 1.2
   
2. Peel off the sticker cover on the wall side of the bracket.
   
3. Place the sensor onto the wall and press firmly to make sure the sensor is secured. [Figure 1.3]
   
   Figure 1.3

Note: Do not press directly on the sensor's display screen while hanging it on to the wall.

Placing the sensor on a flat surface

1. Attach the desktop stand to the back of the sensor. [Figure 1.4]
   
   Figure 1.4
   
2. Place your sensor on a flat surface like a shelf or desk.

Operation

VeSync App Setup

Note: The VeSync app is continually being improved and may change over time. If there are any differences, follow the in-app instructions.

1. To download the VeSync app, scan the QR code or search "VeSync" in the Apple App Store® or Google Play Store.
   
   
   
   
   
   
   
   Note: For Android™ users, choose "Allow" to use VeSync.
   
2. Open the VeSync app. If you already have an account, tap Log In. To create a new account, tap Sign Up.
   Note: You must create your own VeSync account to use thirdparty services and products. These will not work with a guest account. With a VeSync account, you can also allow your family and friends to control your sensor.

Connecting the sensor to the VeSync app

1. Tap the + icon on the VeSync app home screen.
2. Choose the Levoit Aura™ Sensor.
3. Remove and reinsert the batteries to put the sensor in pairing mode.
   Note: Make sure the battery tab is removed. Otherwise, the sensor will not work and will not go into pairing mode.
4. If you only have one sensor, the sensor will automatically pair with your smart thermostat.
   • If you are pairing multiple sensors at once, select the 4-digit code that matches the sensor you are currently trying to pair.
     Note: Sensors will automatically pair with all Levoit smart thermostats associated with your VeSync account.
5. Pick a room for your sensor.
6. Name your sensor (e.g., "living room sensor").
   Note:
   • You can change the sensor's name and icon at any time by going to the sensor's screen in the VeSync app and tapping .
   • The sensor must be paired with a Levoit smart thermostat in the VeSync app in order to remotely monitor the sensor's temperature and humidity data.

VeSync App Functions

Remote Monitoring

• Monitor your home's temperature and humidity conditions from anywhere.

Instant App Alert

• Get notified about thermostat alerts directly to your smartphone.

Smart Routines

• Customize your sensor's settings by selecting Smart Routines for it to follow.

Smart Scenes

• Prioritize comfort and air quality in your home using Smart Scenes, which can control your Levoit thermostat, humidifier, and sensor all at the same time.

Temperature & Humidity Graphs

• View your sensor's temperature and humidity history.

Changing the temperature unit

1. Open the VeSync app and tap the sensor's settings icon.
2. Tap Change Unit and select the desired temperature unit.
3. Remove and reinstall the sensor's batteries.
4. Wait for the sensor's display to show the temperature unit has changed.

Maintenance

Replacing Batteries

1. Flip the sensor over and open the battery compartment. [Figure 2.1]
   
   Figure 2.1
   
2. Remove the old batteries and install new AAA batteries, making sure they are inserted correctly. [Figure 2.2]
   
   Figure 2.2
3. Replace the battery compartment lid by securely snapping the cover back into place. [Figure 2.3]
   
   Figure 2.3

Troubleshooting

If your problem is not listed, please contact Customer Support.

VeSync App Troubleshooting

Why isn't my sensor connecting to the VeSync app?

• Make sure your sensor and phone are within 30 ft of each other.
• Reset the sensor by removing and reinserting the batteries, then try connecting again.

The sensor is offline.

• Make sure the sensor has batteries installed and the battery polarity is correct. [Figure 3.1]
  
  Figure 3.1
  
• Make sure your router is connected to the internet and your smartphone's network connection is working.
• Refresh the VeSync menu by swiping down on the screen.
• Delete your offline sensor from the VeSync app. Swipe left (iOS®) or press and hold (Android™), then tap Delete. Restart the sensor's pairing process with the VeSync app.

Note: Power outages, internet outages, or changing Wi-Fi routers may cause your sensor to go offline.

If your problem is not listed, please contact Customer Support.

FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT - PART 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Questions or Concerns?

Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT at
support@levoit.com or at
(888) 726-8520.

Documents / Resources

References

• App Store - Apple
• Google Play

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Levoit Aura, LTM-A401S-WU - Smart Thermostat Manual