Advertisement
Available languages
Available languages
Check power status
• Click once on the POWER button and the LED
indicators will light up and indicate the remaining
power status.
• If the USB cable is not disconnected while the
charging process finishes, push the POWER button
first to restart the charging.
Small current supply mode
• Press the POWER button for 8 seconds when your
device is being charged.
• The function is mainly used to charge certain
wearable electronic devices. When charging a device
that needs a charging current less than 100mA via a
USB-A port, this mode should be activated. You can
press the button for 3 seconds to exit this mode, it
also automatically closes after 2 hours.
Good to know
• USB cable length and quality influences charging
speed and performance.
• Devices may get warm during charging; this is
completely normal and they will gradually cool down
again after they are fully charged.
• Charging time may vary based on the device's battery
capacity, charge level, the age of the battery and the
temperature in the surrounding area.
• Storage temperature: -10°C to 25°C.
• Power bank operating temperature: 0°C to 40°C.
6
Advertisement
