Sharp XL-E80 Operation Manual page 18

Advanced CD or MP3 disc playback (continued)
XL-E80
! Programmed play
You can choose up to 20 selections for playback in the order you
like.
1
While in the stop mode, press the MEMORY (MEMORY/SET)
button to enter the programming save mode.
2
Press the direct search buttons
on the remote control to select
the desired track.
You can also select a track by pressing the
3
Press the MEMORY (MEMORY/
SET) button to save the track
number.
4
Repeat steps 2 - 3 for other tracks. Up to 20 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
5
Press the ( ) button to start playback.
18
To clear the programmed selections:
While the "MEMORY" indicator is lit, set the CD to the stop mode
and then press the CLEAR button.
Each time the button is pressed, one track will be cleared, beginning
with the last track programmed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 2 - 3 to add tracks. The new
tracks will be stored after the last track of the original program.
Notes:
" If you open the disc tray or enter the stand-by mode, the pro-
grammed sequence is automatically canceled.
" Even if you changed the function from CD to some other function,
the programmed selections will not be cleared.
" During the program operation, random play is not possible.
" When playing MP3 discs, you can display the track number but
cannot select the folder by pressing the direct search button(s).
Selected track number
or button.
Playback order