1. APPLICATION The power tool is intended for sawing wood, metal and plastics. Not suitable for professional use. 2. SAFETY INSTRUCTIONS 2.1 GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Page 4
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts.
Page 5
6) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. b) Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
Page 6
2.3 SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGER Batteries Never attempt to open for any reason. Do not store in locations where the temperature may exceed 40°C (104°F). Charge only at ambient temperatures between 4°C and 40°C (39.2°F and 104°F). Charge only using the charger provided with the tool.
Symbols Conforms to relevant safety standards To reduce the risk of injury, the user must read and understand this manual before using this product. Wear ear protectors. Exposure to noise can cause hearing loss. Wear eye protection. Class II, double isolation(only for charger) Do not dispose of old appliances with domestic rubbish 3.
4. PACKAGE CONTENT LIST ▪ Remove all packaging materials. ▪ Remove remaining packing and package inserts (if included). ▪ Check that the package contents are complete. ▪ Check the appliance, the power cord, the power plug and all accessories for transportation damage. ▪...
Page 9
2 LED(s) are lit: The battery has approx 50% remaining charge. 1 LED is lit: The battery will be empty soon, please recharge the battery. 5.2 CHARGER INDICATOR Indicator status Explanations and actions Ready for use The charger is connected to the mains and is ready for use; there is no battery pack in the charger.
Page 10
• Orbital action provides faster cut, but with a rougher cut across the material. In orbital action, the blade moves forward during the cutting stroke in addition to the up and down motion. Note: Metal or hardwoods should never be cut in orbital action. •...
6. CLEANING AND MAINTENANCE 6.1 CLEANING ▪ Keep the ventilation slots of the machine clean to prevent overheating of the engine. ▪ Regularly clean the machine housing with a soft cloth, preferably after each use. ▪ Keep the ventilation slots free from dust and dirt. ▪...
Product: Cordless Jigsaw 20V Trade mark: Feider Model: FSS20V-A Serial number: 20211003969-20211004468 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.
10. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identifed as defective by the designated distributor.
11. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine.
12. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
Page 16
BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux - France MADE IN PRC...
Need help?
Do you have a question about the FSS20V-A and is the answer not in the manual?
Questions and answers