Advertisement
Connecting the DWL-2200AP Wireless
Access Point to Your Network
A.
First, connect the power adapter to the receptor at the back panel of the
DWL-2200AP and then plug the other end of the power adapter to a wall outlet
or
power strip. The Power LED will turn ON to indicate proper operation.
B.
Insert one end of the cable to the Ethernet port on the back panel of the
DWL-2200AP and the other end of the cable to an Ethernet Broadband
Router (i.e., D-Link DI-604) or Switch (i.e., D-Link DSS-5+). Note: You also
have the option of connecting the DWL-2200AP directly to the computer that will
be used for configuration. The Link LED light will illuminate to indicate a proper
Ethernet connection. (Note: The Ethernet Port on the DWL-2200AP is Auto-
MDI/MDIX.
to connect to the Ethernet port on the DWL-2200AP.)
C.
The DWL-G650 AirPlus Xtreme G Wireless Cardbus Adapter and the DWL-
G520 AirPlus Xtreme G Wireless PCI Adapter will connect, out of the box , with
the DWL-2200AP, using their default wireless settings. Computers with 802.11b
wireless adapters can also connect to the DWL-2200AP.
Pressing this button restores
the Access Point to its original
factory default settings.
Meaning you can use a straight-through or crossover-Ethernet cable
C.
Antennas
wirelessly connect to
802.11b/g adapters.
Reset Button
Used to
B.
LAN PORT
connecting the access
point to a switch on the
local network with an
ethernet cable
2
for
A.
Receptor for
Power
Adapter.
Advertisement
