AEG HK874400FB User Manual page 9

Hide thumbs Also See for HK874400FB:
Table of Contents

Advertisement

The relation between heat setting and
times of the function:
, 1 — 3 — 6 hours
• 4 — 7 — 5 hours
• 8 — 9 — 4 hours
• 10 — 14 — 1.5 hours
5.3 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct
heat setting.
5.4 Using the cooking zones
Put the cookware on the cross / square
which is on the surface that you cook.
Cover the cross / square fully. Induction
cooking zones adapt to the dimension of
the bottom of the cookware
automatically. You can cook with the
large cookware on two cooking zones at
the same time.
5.5 Grill Function
Use this function with the
Maxisense Plancha Grill
accessory.
This function connects two right side
cooking zones under the accessory and
they operate as one.
First set the heat setting for one of the
right side cooking zones.
1 The accessory is not supplied with the appliance. For more information, please contact your local
supplier.
To activate the function: touch
set or change the heat setting touch one
of the right control sensors.
To deactivate the function: touch
The cooking zones operate
independently.
5.6 Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function for a cooking
zone: touch
Immediately touch the correct heat
setting. After 5 seconds
To deactivate the function: change the
heat setting.
5.7 Power function
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
To activate the function for a cooking
zone: touch
To deactivate the function: change the
1
heat setting.
5.8 Timer
Count Down Timer
You can use this function to set how long
the cooking zone operates for only this
one time.
To activate the function the
cooking zone must be cold.
(
comes on).
Refer to "Technical
information" chapter.
.
comes on.
ENGLISH
9
. To
.
comes on.

Advertisement

Table of Contents
loading

Table of Contents