Page 1
270-F Series Gear-type tube bender INSTRUCTIONS OF USE...
Page 2
270-F Series INSTRUCTIONS OF USE APPLICATION For bending soft and half-hard copper, aluminium brass, steel and other tubing and pipe which had been tempered and is suitable for bending. PARTS 1. Gear bender body 5. Handle 9. Spring ring 2. Geared forming wheel 6.
Page 3
270-F Series INSTRUCTIONS OF USE INSTRUCTIONS For making right hand bends, hold Attach forming wheel with hook Turn handle clockwise until desired tube across shoe face. point facing down and chained degree of bend is obtained. Handle centre pin inserted into left hole.
Page 5
270-F Series INSTRUCTIONS OF USE REPLACEMENT PARTS SPRING RING HOOK SHOE PIVOT PIN SHOE WASHER FULCRUM PIN SHOULDER BOLT CHAIN HANDLE WHEEL DRIVE SCREW SPRING RING DRIVE SCREW COTTER PIN TUBE Size PART PART PART PART PART PART PART PART...
This manual is also suitable for:
270-f-06270-f-08270-f-10270-f-12270-f-14270-f-16...
Show all
Need help?
Do you have a question about the 270-F Series and is the answer not in the manual?
Questions and answers