Table of Contents
Advertisement
Bagging the Clippings
Use the grass bag when you want to collect grass and leaf clippings from the lawn.
If the side-discharge chute is on the machine, remove it; refer to
14). If the bag-on-demand lever is in the recycling position, move it to the bagging position; refer to
the Bag-on-Demand Lever (page
Installing the Grass Bag
1.
Raise and hold up the rear deflector (A of
2.
Install the grass bag, ensuring that the pins on the bag rest in the notches on the handle (B of
3.
Lower the rear deflector.
Removing the Grass Bag
To remove the bag, reverse the steps in
Operating the
Bag-on-Demand Lever
The bag-on-demand feature allows you to either
collect or recycle grass and leaf clippings while the
grass bag is attached to the machine.
•
To bag the grass and leaf clippings, press the
button on the bag-on-demand lever and move the
lever forward until the button on the lever pops up
(Figure
18).
Figure 18
1. Bag-on-demand lever (in the bagging position)
•
To recycle or side-discharge the grass and
leaf clippings, press the button on the lever and
13).
Figure
17).
Figure 17
Installing the Grass Bag (page
g027453
13
Removing the Side-Discharge Chute (page
13).
move the lever rearward until the button on the
lever pops up.
Important:
For proper operation, remove
any grass clippings and debris from the
bag-on-demand door and the surrounding
opening
(Figure
19) before you move the
bag-on-demand lever from 1 position to
another.
Figure 19
1. Clean here
Operating
Figure
17).
g233434
g027454
Advertisement
Table of Contents
