Picture Menu - Samsung SyncMaster 3 Series User Manual

Basic Features

Picture Menu

Changing the Preset Picture Mode
¦
MENUm → Picture → Picture Mode → ENTERE
Picture Mode
t
Select your preferred picture type.
✎
When connecting a PC, the Picture Mode is only available
the Standard and Entertain.
Dynamic: Suitable for a bright room.
■
Standard: Suitable for a normal environment.
■
Movie: Suitable for watching movies in a dark room.
■
Entertain: Suitable for watching movies and games.
■
✎
It is only available when connecting a PC.
Adjusting Picture Settings
¦
MENUm → Picture → ENTERE
Samsung MagicAngle
Adjust screen viewing Angle to optimize screen quality according
to your viewing position.
Samsung MagicAngle: When viewing the screen at an
■
angle from below or above by setting the appropriate mode
for each position you can obtain a similar picture quality as
viewing the screen directly from the front.
x
Off: Select when viewing from the front position.
x
Lean back mode: Select when viewing from a slightly
lower position.
x
Standing Mode: Select when viewing from the upper
position.
Mode: Adjust screen viewing angle.
■
✎
When Samsung MagicAngle is set to Lean back mode
or Standing Mode, Gamma is not available.
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
✎
NOTE
x
In analogue TV modes of the PAL system, the Tint
(G/R) function is not available.
x
When connecting a PC, you can only make changes to
Backlight, Contrast, Brightness and Sharpness.
x
Settings can be adjusted and stored for each external
device connected to the LED display.
x
Lowering picture brightness reduces power
consumption.
Screen Adjustment
Picture Size: Your cable box / satellite
■
receiver may have its own set of screen
sizes as well. However, we highly
recommend you use 16:9 mode most of
the time.
Auto Wide: Automatically adjusts the
picture size to the 16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
✎
Adjusts the Position by using u / d buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the
screen size.
✎
Adjusts the Zoom or Position by using u / d
button.
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre of
the screen may cause image retention (screen burn)
which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when
HDMI (720p / 1080i / 1080p) signals are inputted.
✎
Adjusts the Position by using u / d / l / r button.
✎
NOTE
x
Depending on the input source, the picture size options
may vary.
x
The available items may differ depending on the
selected mode.
x
When connecting a PC, only 16:9 and 4:3 modes can
be adjusted.
x
Settings can be adjusted and stored for each external
device connected to an input on the LED display.
x
If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and right
as in the overscan function.
23
English