Advertisement
•
Formats hard disk and creates new partition.
This process will format whole hard disk drive and create new partition. You can
select the volume of C: and D: drives. The contents of the hard disk will be restored
to its original state in C: drive.
Formatting the Drives And Re-installing Windows
1. Make sure the computer is turned off.
2. If any peripheral devices are connected to your computer, disconnect them
except the external CD-ROM drive unit (CE-CD05).
3. Connect the AC adapter; then, turn on the computer.
Be sure to connect the AC adapter. If the battery is completely
discharged, the installation process will be canceled.
4. When the message Press <F2> to enter SETUP appears, press F2. The Setup
Utility opens.
5. Insert the Product Recovery CD-ROM disk 1 into the CD-ROM drive.
6. In the Exit menu, select Load Setup Defaults; then, press Enter twice.
7. In Boot Sequence of the Boot menu, set CD-ROM Drive to the top of the list;
then, press ESC.
8. In the Exit menu, confirm Exit Saving Changes is highlighted and press Enter
twice.
9. Read the message on the screen, and select the way to recover your system;
then, press Enter. If you selected Formats hard disk and creates new partition,
go to the next step. Otherwise, go to Step 11.
10. Select the volume of C: drive and press Enter.
11. Read the message and select Continue; then, press Enter.
Although the pointer may be shown on the screen, never touch the
keyboard or the mouse during recovery except when the message prompts
you to. If you touch them, the re-installation will be canceled.
12. If you see the message asking you to insert the Product Recovery CD-ROM
disk 2, remove the disk 1 and insert the disk 2; then, press Enter.
5
Advertisement
