الذي تم إرفاقه مع وصف الجهاز (صفحة page 4 page 8 ELECTRICAL CONNECTION (UK ONLY) A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug should be cut off from the mains lead, and an appropriate plug fitted, as below.
Page 5
not suitable for use in: staff kitchens in INTRODUCTION Thank you for choosing a De’Longhi product. Please take shops, offices and other workplaces, a few moments to read the instructions to avoid risks or farm houses, hotels, motels or other damage to the appliance.
Page 6
is boiling. Keep the kettle, the power base, and the mains lead away from hotplates, hobs or burners. - If the kettle is overfilled, boiling water may overflow. Please note: - The heating element surface is subject Remove the kettle from its power base before filling. to residual heat after use.
The boiled water should be discarded and the kettle boiled (the ON/OFF switch will click upwards and the rinsed out with cold water. This procedure should be lights will switch off ). carried out three times, to remove any manufacturing To turn the kettle off before the water boils, you may dust, etc.
TECHNICAL CHARACTERISTICS When the water is heated, the minerals in the water solidify, making the water appear cloudy. These minerals form a Power supply See rating plate thin film on the walls, element and on the surface of the Absorbed power “...
Need help?
Do you have a question about the KBO Series and is the answer not in the manual?
Questions and answers