Caring For Your Monitor; Detaching The Monitor Stand; Wall Mounting (Optional) - Lenovo C27-40 User Manual

Caring for your monitor

Detaching the monitor stand

Wall Mounting (Optional)

2-10 C27-40 LCD Monitor User's Guide
Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
Apply water or liquid directly to your monitor.

Use solvents or abrasives.

Use flammable cleaning materials to clean your monitor or any other electrical

equipment.
Touch the screen area of your monitor with sharp or abrasive items. This type of

contact may cause permanent damage to your screen.
Use any cleaner which contains an anti-static solution or similar additives. This may

harm the coating of the screen area.
Do:
Lightly dampen a soft cloth with water and use this to gently wipe the covers and

the screen.
Remove grease or finger marks with a damp cloth and a little mild detergent.

After placing the monitor face down on a clean surface or soft cloth, Loosen the screws,
Remove the stand and base from the monitor.
Refer to the instructions that come with the base mounting kit. To convert your LCD display
from a desk-mounted to a wall-mounted display, do the following:
Step 1: Verify that the Power button is turned off, and then disconnect the power cord.
Step 2: Lay the LCD display face down on a towel or blanket.
Step 3: Remove the base from the monitor, refer to "Detaching the monitor base and stand".
Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm
x100mm distance), VESA Mounting Screw M4 x 10 mm.
Step 5: Attach the LCD display to the wall, following the instructions in the wall-mounting
kit. For use only with UL&GS Listed Wall Mount Bracket with minimum
weight/load: 8 kg