Sharp LD-26SH1U Operation Manual page 9

26’’ lcd color tv
Table of Contents

Advertisement

- The TFT color LCD panel used in this TV is made
with the application of high precision technology.
However, there may be minute points on the
screen where pixels never light or are
permanently lit. Also, if the screen is viewed from
an acute angle, there may be uneven colors or
brightness. Please note that these are not
malfunctions but common phenomena of LCDs
and will not affect the performance of the TV.
- Do not display a still picture for a long period, as
this could cause a residual image.
- If the brightness is adjusted to the minimum
setting, it may be difficult to see the screen.
- The quality of the video signal may influence the
quality of the display. We recommend using an
equipment able to emit high quality video signals.
- Never rub or tap the TV with hard objects.
- Please understand that Sharp Corporation bears
no responsibility for errors made during use by
the customer or a third party, nor for any other
malfunctions or damage to this product arising
during use, except where indemnity liability is
recognized under law.
- This TV and its accessories may be upgraded
without advance notice.
Location
- Do not use the TV where ventilation is poor,
where there is a lot of dust, where humidity is
high, or where the TV may come into contact
with oil or steam, as this could lead to fire.
- Ensure that the TV does not come into contact
with water or other fluids. Ensure that no objects
such as paper clips or pins enter the TV as this
could lead to fire or electric shock.
- Do not place the TV on top of unstable objects or
in unsafe places. Do not allow the TV to come
into contact with strong shocks or vibrations.
Causing the TV to fall or topple over may
damage it.
- Do not use in places where the TV will be
subject to direct sunlight, near heating
equipment or anywhere else where there is
likelihood of high temperature, as this may lead
to generation of excessive heat and outbreak of
fire.
Tips and safety instructions
E8
Power cord
- Do not damage the power cord, place heavy
objects on it, stretch it, or over bend it. Also, do
not add extension cords. Damage to the cord
may result in fire or electric shock.
- Use only the power cord supplied with the TV.
- Insert the power plug directly into the AC outlet.
Adding an extension cord may lead to fire as a
result of overheating.
- Do not remove or insert the power plug with wet
hands. Doing so could result in electric shock.
- Unplug the power cord if it is not used for a long
time.
- Do not attempt to repair the power cord if it is
broken or malfunctioning. Refer the servicing to
the service representative.
Manual scope
- In this manual, Microsoft Windows XP will be
referred to as "Windows XP", Microsoft Windows
Millennium as "Windows Me", Microsoft
Windows 2000 as "Windows 2000", Microsoft
Windows 98 as "Windows 98", and Microsoft
Windows 95 as "Windows 95". When there is no
need to distinguish between programs, the term
"Windows" will be used.
- Microsoft and Windows are registered
trademarks of Microsoft Corporation.
- Macintosh is a registered trademark of Apple
Computer, Inc.
- HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
- All other brand and product names are
trademarks or registered trademarks of their
respective holders.
- Actual screens and buttons may differ from those
as shown in this manual.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents