Empire Comfort Systems DVCP32BP30N-4 Installation Instructions Manual page 12

Direct-vent zero clearance gas fireplace heater
Table of Contents

Advertisement

FBB10 BLOWER KIT INSTALLATION (OPTIONAL) (CONT'D)
4.
Remove log set and decorative media. Remove brackets
and liners if installed. Retain bracket and screws for
reassembly. See Figure 7. (Reflective liners shown)
5.
Remove burner cover by lifting off. See Figure 8.
6.
Remove log support by removing the two screws securing
the metal plate to log support. Retain log support and screws
for reassembly. See Figure 9.
Page 12
Figure 7
Figure 8
Figure 9
7.
Remove the four screws securing burner and slide to right
then lift burner off. Retain burner and screws for reassembly.
See Figure 10.
8.
Remove ten screws and lift burner assembly. Disconnect
gas line. Retain screws and burner assembly for reassembly.
See Figure 11.
9.
Remove the screws securing the left latch assembly to the
underside of the firebox. Retain screws and latch assembly
for reassembly. See Figure 12.
PART OF BOTTOM
REMOVED FOR
CLARITY
Figure 10
Figure 11
Figure 12
PART OF BOTTOM
REMOVED FOR CLARITY
39612-4-0620

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents