10. Connect the signal cable and the power cable to the new storage drive.
11. Reinstall all removed parts.
12. Place the computer in an upright position. Then, reconnect the power cord and all disconnected cables
to the computer.
Note: If a locking device is available, use it to lock the computer.
Power supply assembly
Prerequisite
Before you start, read Appendix A "Important safety information" on page 85 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 47.
2. Remove the screws and slide the power supply assembly out.
58
User Guide