Table of Contents
Advertisement
m m
1 5
5
How to use
Water hardness & regeneration settings
The dishwasher requires lime free water. Hard water leaves watermarks on
your dishes. Your dishwasher has a special water softening system to remove
the hardness of the tap water. Setting this system correctly will increase the
washing effectiveness.
To find out the water hardness level of water in your area, contact your local
Water Board or Determine water hardness level by the help of test strip
provided.
If you move to a different location, the level of water hardness
will possibly be different. It is essential to reset the water
hardness in order to obtain optimum washing efficiency.
Test Strip
a
b
Remove the
Let the water
test strip from
flow from your
its packing.
tap for 1 minute.
c
d
1 second
Take the test strip
Fill a glass with
out of the water and
tap water and
dip the test strip
shake it.
into water for 1
second.
e
f
Level 1
Level 2
Level 3
Level 4
1 minute
Level 5
Level 6
Hold for
Set the water hardness level of your dishwasher
1 minute.
according to the result shown by the test strip.
11 GB
Make sure your
dishwasher is perfectly
level using the
adjustable feet.
When the appliance is
correctly levelled, the
door will not catch on
the inner liner on either
side of the cabinet.
If the door does not
close correctly, loosen or
tighten the adjustable
feet, until the machine is
perfectly level.
No Lime
Very low lime content
Low lime content
Medium lime content
High lime content
Very High lime content
Advertisement
Table of Contents
