Table of Contents
Advertisement
Equalizer & Stereo menus
1.
Press the MENU button
2.
Press the GREEN button
Menu.
AUDIO EFFECTS Menu
3.
Press the YELLOW button
EQUALIZER Menu
4.
Press the YELLOW button
equalization: Personal / Classic / Jazz / Pop / In concert / Sport .
5.
To change the Personal option:
a) Press the Cursor LEFT/RIGHT buttons
100Hz, 330Hz, 1KHz, 3.3KHz or 10KHz
The red point mark indicates the selected item.
b) Press the Cursor UP/DOWN buttons
Adjust.
Note: The Equalizer adjustments are not operative for the
headphones.
6.
Press the BLUE button
7.
Press the Cursor UP/DOWN buttons
Speakers matrix, Headphones matrix, AV Matrix [ ] or
Identification.
The red point mark indicates the selected item.
8.
Press the Cursor LEFT/RIGHT buttons
Select Speakers matrix to change the sound mode in the
speakers.
Select Headphones matrix to change the sound mode in the
headphones.
Select AV matrix to change the sound mode in the audio output
of the external connector (AV-1/AV-2).
Select Identification to activate (ON) or deactivate (OFF) the
automatic Identification of audio system of the current program
[ ] .
9.
Press the MENU button
About Matrix: Depending on the sound transmission the sound reproduction can be chosen in the STEREO Menu.
In this menu you can select a sound mode to the speakers, another to the headphones and another to the external connectors (AV-1/AV-2).
When the TV set is receiving a STEREO NICAM programme, the TV selects STEREO automatically, and you can change:
When the TV is receiving a BILINGUAL NICAM programme, the TV selects DUAL CHANNEL A automatically, and you can change:
DUAL CHANNEL A
When the TV set is receiving a MONO NICAM programme, the TV set selects MONO NICAM automatically, and you can change:
When the TV is receiving a MONO FM programme, the TV set selects MONO automatically but the sound mode cannot be change.
About Identification
IDENTIFICATION ON: The TV automatically identifies the sintonized audio system MONO FM, STEREO NICAM or DUAL NICAM SIGNAL.
IDENTIFICATION OFF: Disqualifies the automatic identification of the audio system and forces the sound into MONO FM.
This mode can be convenient when the level of the signal received is extremely weak. This function is independent for every program.
to see the MAIN Menu.
to see the AUDIO EFFECTS
to see the EQUALIZER Menu.
to select a pre-defined
C
I
/
E
F
/
to see the STEREO Menu.
STEREO Menu
E
F
/
C
I
/
to change.
to close the STEREO Menu.
STEREO
DUAL CHANNEL B
MONO NICAM
to select:
to
to select:
MONO
DUAL CHANNEL A B
MONO
18
MAIN Menu
AUDIO EFFECTS Menu
EQUALIZER Menu
STEREO Menu
MONO
Advertisement
Table of Contents
