Table of Contents
Advertisement
ADCP-90-299 • Issue 3 • October 2007
3 GROUNDING THE RACK
To ground the rack, follow the instructions in drawing 1.
1
Attach ground cables to rack as specified in numbered steps.
1
Remove paint to expose bare
metal in grounding location. Apply
bonding compound to bare metal.
2
Secure cable ground lugs to top
of frame using 12-24 screws.
USE
ONLY 6
AWG OR
THICKER
COPPER
WIRE
3
Use plastic clips (provided) to secure
frame ground cable to frame rail.
NOTE: GROUND KIT
INCLUDED WITH RACK
Page 16
© 2007, ADC Telecommunications, Inc.
TO OFFICE
GROUND
FRAME
GROUND
CABLE
GROUND
LUG
4
OFFICE
Connect office ground cable
GROUND
to office ground source
CABLE
according to local practice.
18603-B
Advertisement
Table of Contents
