Sharp Notevision XG-C335X Setup Manual page 40

Resetting the Lamp Timer of the Projector via LAN
5
Click "Properties" on the "File"
menu.
6
Click the "Settings" tab, and
then click "ASCII Setup".
7
Select the check boxes next to
"Send line ends with line feeds",
"Echo typed characters locally",
and "Append line feeds to in-
coming line ends", and click
"OK".
• The LAMPRESET Properties window
appears, click "OK".
8
If a user name and/or password
is set for the projector, enter the
user name and password.
9
Send the lamp reset command
"LPRE0001".
• This command can only be sent when
the projector is in standby mode.
• When "OK" is received, this indicates
that the lamp was successfully reset.
10
Close HyperTerminal.
-40