Samsung CLP-670N Service Manual page 88

● Code
01-010
● Symptom
Paper jam in exit area
● Possible Cause
- If there is no jammed paper but error has occurred at warm-up, exit sensor is defective.
● Troubleshooting method
1. If the actuator fuser sensing part has some problems, replace the actuator fuser and exit sensor.
2. Reconnect the flat cable / Exit sensor harness.
Service Manual
Alignment & Troubleshooting
● Error message
Paper jam in exit area
Flat Cable Flat Cable
3p Exit sensor 3p Exit sensor
4-29
Samsung Electronics