Advertisement
ERROR in the display and/or hum or bleep on the headphone
- Pull the plug with the red/black wire out of the power supply PCB (1) (this socket remains vacant and the wire should be fixed
in the bunch of wires).
- Plug the red/black wire of the Error Fix PCB into the power supply PCB (2).
1
1
- Put the red and blue wires across the connector block of the
- Then connect the brown and blue wire of the Error Fix
- Loop the wires and fasten them with the tie wrap
- Tie the blue and brown wires to the mains cord with a tie
2
HB935/A /B /C /D
mains cord, turn the Error Fix PCB upside down and fasten
it in the vacant spot with double-sided adhesive tape (first
remove the backing).
PCB in parallel to the mains cord connector.
supplied (1).
wrap (2).
2
12-12
Advertisement
