Precautions When Using Art Mode - Samsung QN50LS03T User Manual

Video Apps problems (Youtube etc)
• Change the DNS to 8.8.8.8. Select
Setting > Enter manually > DNS Server > enter 8.8.8.8 > OK.
• Reset by selecting >
The TV remains on or does not turn on automatically.
• If the surrounding area is too dark or bright, the motion sensor may not work normally. The performance of the
motion sensor may be affected by the installation environment (height, tilt, obstacles). If the clothes you wear or
your skin color is similar to the surrounding shading, the motion sensor may not work properly.
• The TV responds to all visual changes around it (lights, displays, dogs, out-of-window changes, and other
occurrences). You can adjust the response level by adjusting the sensitivity of the motion detector.
( > Art > Settings > Motion Detector)

Precautions when using Art mode

• The motion sensor is located at the bottom of the TV. Do not block the sensor at the front of the TV. The motion
sensor as well as the brightness and color tone of the screen can be affected.
• Art mode uses algorithms to minimize image burn-in that can be caused by displaying still images on the screen
for long periods of time.
• The performance of the sensor may vary depending on the TV installation and operating environment.
– The screen brightness and color tone may be affected depending on the color of the floor on which the TV
stands.
– In an environment where special light sources other than standard light sources (halogen, fluorescent) are
used, the sensor's motion recognition performance may vary depending on the positions, types, and number of
the light sources.
– If the area around the TV is too dark or bright, the screen brightness may be limited or the sensor may not work
normally.
– If the TV is installed too high or too low, the sensor may not work normally.
– The motion sensor may sense motion from a flashing LED, a pet, a car moving outside the window, or other
occurrence and start operating.
• Depending on the Auto Power Off function settings, the TV may turn off when there is no user input in Art mode,
such as inputs from the remote control (
• > Settings > General > System Manager > Time > Sleep Timer and Off Timer function does not work in Art
mode.
• > Settings > General > System Manager > Auto Protection Time function does not work in Art mode.
English - 26
> Settings > General > Network > Network Status > IP Settings > DNS
Settings > Support > Device Care > Self Diagnosis > Reset Smart Hub.
> Settings > General > Eco Solution > Auto Power Off).