Invacare Action 2 NG User Manual page 42

Invacare® Action 2 NG
according to ISO 10542-2. Contact your local Invacare
authorized dealer for more information on getting and
installing an approved and compatible restraint system.
WARNING!
If, for some reason, it is impossible to transfer the
wheelchair user to a vehicle seat, the wheelchair
can be used as a seat in a vehicle if the following
procedures and regulations are followed. A
transportation kit (optional) have to be fitted on
the chair for such a purpose.
– The wheelchair must be secured in the vehicle
with a 4-point wheelchair restraint system.
– The user must wear a 3-point passenger
restraint system secured to the vehicle.
– The user could be additionally secured with a
posture belt in the wheelchair.
WARNING!
Safety restraint devices must only be used when
the wheelchair user's weight is 22 kg or more
(ISO-7176-19).
– Do not use the wheelchair as a seat in a vehicle
when the user weight is lower than 22 kg.
42
WARNING!
– Before journey contact transporter and request
information about the capability for the below
required equipment.
– Make sure there is sufficient free space around
the wheelchair and user to avoid the user
making contact with other vehicle occupants,
unpadded parts of the vehicle, wheelchair
accessories or anchor points of the restraint
system.
WARNING!
– Make sure the tie-down points at the
wheelchair are not damaged and that the
parking brakes are fully functional.
– It's recommended to use puncture-proof tires
during transport to avoid brake problems due
to reduced tire pressure.
WARNING!
Injury or damage may occur from wheelchair
components or accessories loosened during a
collision or sudden stop.
– Ensure all removable or detachable
components and accessories are removed from
the wheelchair and securely stored in the
vehicle.
– It is essential to have your wheelchair checked
by an authorized dealer after an accident,
collision etc.
1608216-B