About Function & Mode Select Switches - FujiFilm UA13x4.5BERD-S9 Operation Manual

Table of Contents

Advertisement

Available languages

Available languages

The function of some switches incorporated in this lens can be changed to other functions.
The function can be changed by setting switches in the function & mode select switches. The function & mode
select switches are accessible by removing the round rectangular rubber cap on the front of the drive unit.
The illustration shows the positions set at the factory.
QUICKZOOM ON/OFF SWITCH
VTR → QUICKZOOM SELECT SWITCH
RETURN → QUICKZOOM SELECT SWITCH
AUXILIARY SWITCH
QuickZoom ON/OFF Switch
This switch changes the function of the quickzoom & auto cruising zoom switch to ON and OFF.
VTR → QuickZoom Select Switch
This switch changes the function of the VTR switch to that of the quickzoom switch.
(The function of the VTR switch incorporated in the zoom rate demand unit or the shot box linked to this lens
is also changed to that of the quickzoom switch.)
Return → QuickZoom Select Switch
This switch changes the function of the return switch to that of the quickzoom switch.
(The function of the return switch incorporated in the zoom rate demand unit or the shot box linked to this lens
is also changed to that of the quickzoom switch.)
Auxiliary Switch
An auxiliary switch.
Auto Cruising Zoom ON/OFF Switch
This switch changes the auto cruising zoom function to ON and OFF. If this switch is set to OFF, an auto
cruising zoom operation cannot be performed from all the switches that are set as an auto cruising zoom switch.
Iris Comp ON/OFF Switch
This switch changes the iris compensation function to ON and OFF.
Note. In the iris remote mode, the image of the picture darkens when the extender is used.
The iris compensation function prevent this happening.
Iris A-M Position Change Switch
The positions of the auto iris mode and the manual mode set in the iris mode select knob can be interchanged
by setting this switch.
Zoom Limit ON/OFF Switch
This switch changes the zoom limit function to ON and OFF.
For the zoom limit function, refer to section "Zoom Limit Operation" (pages 10 thru 11).
ABOUT FUNCTION & MODE SELECT SWITCHES
FUNCTION & MODE SELECT SWITCHES
SW1
SW2
AUTO CRUISING ZOOM ON/OFF SWITCH
IRIS COMP ON/OFF SWITCH
IRIS A-M POSITION CHANGE SWITCH
ZOOM LIMIT ON/OFF SWITCH
- 14 -

Advertisement

Table of Contents
loading

Table of Contents