1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Washer
  5. ZFV1237
  6. User manual

Zanussi ZFV1237 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EN
Washing Machine / User Manual
ZFV1237

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZFV1237

Summary of Contents for Zanussi ZFV1237

  • Page 1 Washing Machine / User Manual ZFV1237...
  • Page 2 Thank you for choosing this product. This User Manual contains important safety information and instructions on the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference. Icon Type Meaning...

  • Page 3: Table Of Contents

    CONTENTS 1. SAFETY INSTRUCTIONS ....................1 1.1. General Safety Warnings ....................1 1.2. During Use ........................4 1.3. Packaging and Environment..................6 1.4. Savings Information .......................6 2. TECHNICAL SPECIFICATIONS ..................7 2.1. General Appearance......................7 2.2. Technical Specifications ....................7 3. INSTALLATION .........................8 3.1. Removing the Transit Bolts....................8 3.2.

  • Page 4: Safety Instructions

    1. SAFETY INSTRUCTIONS Operating voltage / frequency (V/Hz) (220-240) V~/50Hz Total current (A) Water pressure (Mpa) Maximum 1 Mpa / Minimum 0.1Mpa Total power (W) 2200 Maximum washing capacity (dry laundry) (kg) • Do not install your machine on a carpet or such grounds that would prevent the ventilation of its base.

  • Page 5: General Safety Warnings

    NOTE: For a softcopy of this user manual, please contact the following address: “washingmachine@ standardtest.info”. In your e-mail, please provide the model name and serial number (20 digits) which you can find on the appliance door. Read this user manual carefully. Your machine is for domestic use only.
  • Page 6 as a result of quality checks during production. This will not affect the operation of your Washing Machine. • The packaging of the machine could be hazardous to children. Do not allow children to play with the packaging or small parts from the Washing Machine. •...
  • Page 7 injuries. RISK OF BURNS Do not touch the drain hose or any discharged water while your Washing Machine is running. The high temperatures involved pose a burn risk. RISK OF DEATH FROM ELECTRICAL CURRENT • Do not connect your Washing Machine to the mains electricity supply using an extension lead.
  • Page 8 corrosion. Never use paint removing materials in your machine. • Never use products that contain solvents in your machine. • Please ensure that garments loaded into your Washing Machine are free from foreign objects such as nails, needles, lighters and coins. Risk of fire and explosion Risk of falling and injury •...

  • Page 9: During Use

    1.2. During Use • Keep pets away from your machine. • Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened.

  • Page 10: Savings Information

    NOTE: Specifications for the machine may vary depending on the product purchased. Replacement of drive belt, only by authorized service. Only original spare belt: 42006396 Optibelt 6 EPJ 1236 1.3. Packaging and Environment Removal of packaging materials Packaging materials protect your machine from any damage that might occur during transportation.

  • Page 11: Packaging And Environment

    CE Declaration of conformity We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old machine The symbol on the product or on its packaging indicates that this product may not be treated as household waste.

  • Page 12: Technical Specifications

    2. TECHNICAL SPECIFICATIONS 2.2. Technical Specifications Operating voltage / (220-240) frequency V~/50Hz (V/Hz) Total current Maximum: Water 1 Mpa pressure Minimum : (Mpa) 0.1 Mpa Total power 2200 Maximum dry laundry capacity (kg) Spinning revolution 1200 (rev / min) Programme number 2.1.

  • Page 13: Installation

    3. INSTALLATION 3.2. Adjusting the Feet / Adjusting Adjustable Stays 3.1. Removing the Transit Bolts 1. Do not install your machine on a surface (such as carpet) that would prevent ventilation at the base. • To ensure silent and vibration-free operation of your machine, install it on a firm surface.

  • Page 14: Water Inlet Hose Connection

    • The mains cord of your washing or double water inlet connection (hot machine is equipped with an earthed and cold) depending on the machine plug. This plug should always be specifications. The white capped hose inserted to an earthed socket of 10 should be connected to cold water inlet amps.

  • Page 15: Water Discharge Connection

    using the supplied new fill hose. Old hoses 4.1. Detergent Drawer must not be reused. 3.5. Water Discharge Connection • Connect the water drain hose to a standpipe or to the outlet elbow of a household sink, using additional equipment. •...

  • Page 16: Sections

    4.2. Sections 4.3. Program Dial Main wash detergent compartment: This compartment is for liquid or powder detergents or limescale remover. The fluid detergent level plate will be supplied inside • To select the desired programme, turn your machine. (*) the programme dial either clockwise or anti-clockwise until the marker on the Fabric conditioner, starch, detergent programme dial points to the chosen...

  • Page 17: Using Your Washing Machine

    The display panel shows “End” when the your machine are not covered by the selected programme is complete. The warranty. display panel also indicates if a fault has 4. Close zips and fasten any hooks and occurred with your machine. eyes.

  • Page 18: Adding Detergent To The Machine

    amount of detergent to use. NOTE: Take care not to exceed the • In areas of hard water, more detergent maximum load of the drum as this will give will be required. poor wash results and cause creasing. Refer to the washing programme tables for •...

  • Page 19: Additional Functions

    regardless of the programme you selected. When you select a programme the This means that the selected programme maximum temperature for that programme will take less time to complete and will use is automatically selected. To adjust the less water and energy. temperature, press the water temperature adjustment button until the desired (*) Model Dependant...
  • Page 20 3. Delay Timer To select this function, press the Antiallergic button when the symbol is displayed. Delay 5. Easy Ironing(*) Timer Auxiliary function button 3 or 4 Easy ironing • Press the Delay button once. • “1 h” will appear on the display. Using this function will result in your laundry •...

  • Page 21: Cancelling The Programme

    8. Rapid Wash(*) 10. Child Lock Auxiliary function button 3 or 4 Rapid wash You can wash your laundry in a shorter The Child Lock function allows you to lock time, using less energy and water by the buttons so that the wash cycle you have selecting this additional function.

  • Page 22: Programme End

    5.9. Programme End Wash Rinse Spin Your machine will stop by itself as soon as the programme you have selected finishes. • “END” will flash on the electronic display. • You can open the machine’s door and remove the laundry. •...

  • Page 23: Programme Table

    6. PROGRAMME TABLE Programme Laundry type / Descriptions Very dirty, cotton and flax textiles. (Underwear, linen, COTTON 90° 90° tablecloth, towel (maximum 3.5 kg), bedclothes, etc.) Dirty cotton and flax textiles. (Underwear, linen, Pre-Wash Cotton 60° 1&2 tablecloth, towel (maximum 3,5 kg), bedclothes, etc.) COTTON ECO Dirty cotton and flax textiles.

  • Page 24: Cleaning And Maintenance

    7. CLEANING AND 7.2. Water Inlet Filters Water inlet filters prevent dirt and foreign MAINTENANCE materials from entering your machine. We recommend that these filters are cleaned when your machine is unable to receive 7.1. Warning sufficient water, although your water supply is on and the tap is open.

  • Page 25: Pump Filter

    7.3. Pump Filter meet the holes on the front panel side. 6. Close the filter cover. WARNING: The water in the pump may be hot, wait until it has cooled down carrying out any cleaning or maintenance. (*) Specifications may vary depending on the machine purchased.

  • Page 26: Flush Stopper / Body / Drum

    8. FLUSH STOPPER / BODY / DRUM 1. Flush stopper Remove the detergent drawer and disassemble the flush stopper. Clean thoroughly to completely remove any softener residue. Refit the flush stopper after cleaning and check that it is seated properly. 2.

  • Page 27: Troubleshooting

    9. TROUBLESHOOTING Repair of your machine should be carried out by an authorised service company. If your machine requires repair or if you cannot solve an issue with the information provided below, then you should: • Unplug your machine from the mains power supply. •...

  • Page 28: Automatic Fault Warnings And What To Do

    FAULT POSSIBLE CAUSE TROUBLESHOOTING Increase the amount of detergent following the Hard water. manufacturer’s instructions. Unsatisfactory washing result. Your laundry is too tightly packed Check that your laundry is spread out. together in the drum. As soon as the machine is The end of water drain hose is too Check that the drain hose is at a suitable height.
  • Page 29 EN - 26...
  • Page 30 52243079...

Table of Contents