Table of Contents
Advertisement
18
Connecting Peripherals
USB Cable connection
The USB port on the product functions as a USB hub.
To use USB 3.0, connect the A-B type USB 3.0 cable of the product to the PC.
Peripheral devices connected to the USB IN port can be controlled from the PC.
NOTE
•
Make sure to install the most recent Windows OS service pack before using the
product.
•
Peripheral devices are sold separately.
•
A keyboard, mouse, or USB device can be connected to the USB port.
•
Quick Charge is available through the USB1 and USB2 port.
When the Monitor is gone to Power off, Quick Charge is not available.
•
•
The charging speed may vary depending on the device.
CAUTION
Cautions When Using a USB Device
•
A USB device with an automatic recognition program installed, or that uses its own
driver, may not be recognized.
•
Some USB devices may not be supported or may not work properly.
•
It is recommended to use a USB hub or hard disk drive with power supplied. (If the
power supply is not adequate, the USB device may not be recognized properly.)
Connecting Headphones
Connect peripherals to the monitor via the headphones port.
NOTE
•
Peripheral devices are sold separately.
•
If you use angled earphones, it may cause a problem with connecting another external
device to the monitor. Therefore, it is recommended to use straight earphones.
Angled
•
Depending on the audio settings of the PC and external device, headphones and
speaker functions may be limited.
Straight
Advertisement
Table of Contents
