Table of Contents
Advertisement
Attach the Wall Mount Bracket (not included)
Before you begin the third-party
manufacturer instructions, be sure to
do the following things:
1. Place the TV face down on a flat,
clean, safe and cushioned surface.
2. Remove the TV stand if you already
attached it.
3. Place the spacers (not included) in
the corresponding bracket holes.
CAUTION:
• Follow instructions provided with the wall mount bracket. If it is not correctly mounted,
the TV may fall and cause property damage or personal injury.
• When you attach the mount, be sure to use spacers (provided by the third-party
manufacturer) between the TV and the bracket.
• To prevent internal damage to the TV and to ensure it is mounted securely, be sure
to use fixing screws (not included) that are 9.5 - 11.5 mm in length when measured
from the attaching surface of the rear cover. Secure a wall mount bracket to all four
holes.
• Make sure the tilt angle between the rear cover of the TV and the vertical surface is
not more than 15 degrees.
≤15°
Rear cover
Wall mount hole pattern(mm)
Wall mount screw size (mm)
NOTE:
• If you have additional questions, please contact the wall mount manufacturer or the
retailer from which you purchased the TV.
• The diameter and length of the screws differ depending on the wall mount bracket
model.
Vertical
surface
Spacer
(not included)
9.5 - 11.5 mm
Rear cover of the TV
200 × 200
M6
6
Screw
(not included)
Bracket
(not included)
Wall mount bracket
Screw
Spacer
Advertisement
Table of Contents
