Manual Data Transfer Of Measured Results To Vitadock+ App - Medisana 79046 Instruction Manual

The test results may also be transferred manually via Bluetooth to the VitaDock+ app. Therefore
make sure, Bluetooth is activated on your mobile device and follow these steps:
mmol/L
1. Switch on the MediTouch 2
connect device by pressing and
holding the - button for at least
2 seconds. The symbol „
flashes.
>
2. Afterwards, press
„bt"-symbol for the Bluetooth -mode
appears.

8.1 Manual data transfer of measured results to VitaDock+ app

®
®
3. As soon as „bt" flashes,
"
4. When „- - -" appears,
twice , until the
®
®
the device searches for
®
the VitaDock+ app.
the data transfer to
®
VitaDock+ app has
started.
®
>
5. When „OK" appears,
the transfer has been
successfully completed.
NOTE
Never use Bluetooth and
USB connections simultane-
ously, as this would lead to
erroneous results.
®
®
41