Data Transfer To Vitadock+ App Via Bluetooth - Medisana 79046 Instruction Manual

8 Data transfer to VitaDock+ app via Bluetooth

After each measurement the device automatically tries to send the test results via Bluetooth to
your iOS- or Android mobile device. If this transfer is not successful, you may transfer multiple test
results later on manually - therefore check chapter 8.1 Manual data transfer of measured results to
®
VitaDock+ app.
mmol/L
HINTS
• For a successful synchronization of the device with the VitaDock+ app, a stable internet
connection is necessary.
• If the measured results have not been transferred to VitaDock+ app successfully, please
pay attention to chapter 8.1 Manual data transfer of measured results to VitaDock+ app.
40
®
After a measurement, the „bt"-symbol flashes after a beep and
the device tries to establish a Bluetooth -connection to the
VitaDock+ app.
When the test result has been uploaded, the „bt"-symbol stops
flashing.
mmol/L
®
®
®
®
®
®
®