Samsung YP-P2 Service Manual page 34

Troubleshooting
4-2-3 How to Set MAC Address
 Environment for setting MAC address: Windows XP
 When do you perform this procedure?: When NAND data is corrupted and after the DFU Update
 How to download a MAC address
1. Disassemble the YP-P2 case and check the MAC Address sticker inside.
2. Enter the following MAC Address in a blank text file and save it with the name shown below.
3. Establish the USB connection and copy and paste the file to the System Folder.
4. Disconnect the USB connection and Power On the YP-P2.
5. Go to "Menu" → "Bluetooth" → "Bluetooth Settings" → "My Device Info" and check the MAC Address.
6. If an error occurs, the address at which the error occurred will be saved to a text file named "ErrorMac.txt".
Samsung Electronics 4-21