Sega Broadband Adapter Instruction Manual

BAdapter_MA 1/11/01 12:07 PM Page 1
Broadband Adapter
Instruction Manual
Thank you very much for
purchasing the Broadband Adapter.
Before using the Broadband
Adapter, please read this
Instruction Manual as well as the
Instruction Manual and Important
Safety Instructions provided with
the Dreamcast. After reading this
manual, be certain to keep it handy
for future reference.
10BASE-T and 100BASE-TX
compatible
Failure to comply with these cautions may
result in personal injury or property
CAUTION
damage from electric shock or other
accidents.
Never attempt to disassemble or modify the Broadband Adapter.
Do not leave the Broadband Adapter lying on the floor where
someone could step on and damage the Broadband Adapter, or trip
over it and injure themselves.
Never allow anyone, especially small children, to play with the
Ethernet cable that connects to the Broadband Adapter. Also never
allow the Ethernet cable to become wrapped around someone's neck
as it could result in suffocation. The Ethernet cable should only be
handled by a responsible adult.
Follow the precautions shown below when
using the Broadband Adapter. Failure to
Usage Precautions
follow these precautions could damage the
Broadband Adapter or cause it to
malfunction.
[Usage Environment]
Do not use or place the Broadband Adapter in an area that is very hot
or cold, smoky, dusty, humid or in an area where water is common,
such as near a sink or tub.
If you carry the Broadband Adapter into a heated room from outdoor s
on a cold day, the sudden temperature change may cause
condensation to form inside of the Broadband Adapter. In these
circumstances, the Broadband Adapter should be left to rest indoors
for one hour before using it.
The Broadband Adapter should be used in the following environmental
conditions:
Temperature: 41°F to 95°F; humidity: 10% to 80% RH (with no
condensation)
[Handling the Broadband Adapter]
The Broadband Adapter contains precision electronic components.
Do not drop or strike the Broadband Adapter.
Never attempt to disassemble or modify the Broadband Adapter.
If the Broadband Adapter becomes dirty, wipe the dirt away with a dry
cloth. Never use chemicals, cleansers, water, etc.
When connecting the Broadband Adapter, do not apply excessive
force to it. Doing so could damage the Broadband Adapter.
Keep the connectors free of dust and other foreign objects. Dust on
the connectors could result in incorrect operation due to a poor
connection.
[Miscellaneous]
After opening the transparent pack that the Broadband Adapter is
packaged in, dispose of the pack.
FCC Warning
This device complies with Part 15 of FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference (2) this device must accept any inter ference that may be
received, including interference that may cause undesired operation.
Please carefully review the instructions and diagrams below before
attempting to install the Broadband Adapter. If at some point in time you
wish to play a network game or application that only supports the use of
the modem just reverse the procedure described below to reinstall it.
1 Remove the modem
Be sure to turn the power
off and disconnect the
power cable first!
First, it is necessary to remove the modem that is installed in the
Dreamcast. Begin by turning off the power, disconnecting the power cable
and phone cable (if connected) and then turn the Dreamcast on its side as
shown in the illustration above so that the modem is on top.
While holding the Dreamcast securely with one hand, press up on the
modem latch with your other hand and then press up with your thumbs on
the edge of the modem.
Usage Precautions
Always be certain to turn off the Dreamcast and disconnect the power
cable and phone cable (if connected) before removing the modem and
installing the Broadband Adapter.
If you leave a disc in the Dreamcast while removing the modem, you
could damage the disc. Check to ensure that there is no disc still in
the Dreamcast before removing the modem.
You could damage the modem if you
attempt to remove it with only one hand.
Always use two hands when removing the
modem.
Although the modem is attached
somewhat firmly to the Dreamcast, never
use a screwdriver or other implement to
forcibly pry the modem off.
After removing the modem, store it in a safe place for future use.
The modem should only be removed by an adult.
2
Install the Broadbrand Adapter
Once the modem has been removed,
refer to the diagram and insert the
Broadband Adapter. Press firmly on the
Broadband Adapter until it snaps into
place and its edges are flush with the
Dreamcast.
3 Plug in the Ethernet cable
After the Broadband Adapter is
installed, an Ethernet cable (purchased
separately) must be connected. Refer
to About the Ethernet Cable for details
about the type of cable to use.
Ensure the orientation of the connector
is correct and then insert the Ethernet
cable connector into Broadband
Adapter until it clicks into place.
4 Installation complete
Installation of the Broadband Adapter is
complete. Connect a Dreamcast controller,
and other peripheral devices as desired, and
the power cable. To use the Broadband
Adapter, place a Broadband Adapter
supporting game or application into the
Dreamcast and turn the power on. Please
refer to the game or application users manual
for specific details about network connection
and operation.
Modem
Latch
Broadband Adapter
Ethernet cable