Operator Safety While Using Internal Combustion Engines - MASTERPAC PMR60H Operation Manual

SAFETY INFORMATON

1.3 Operator Safety while using Internal Combustion Engines


DO NOT smoke when refueling the engine or during any other fuel handling
operation.

DO NOT refuel a hot or running engine.

DO NOT refuel the engine near an open flame.

DO NOT spill fuel when refueling the engine.

DO NOT smoke while operating rammer.

DO NOT operate rammer near open flames.

ALWAYS refill fuel tank in well-ventilated area.

ALWAYS replace fuel tank cap after refueling.

ALWAYS check fuel lines, fuel cap, and fuel tank for leaks and cracks before
starting engine. Do not run machine if fuel leaks are present, or fuel cap or fuel
lines are loose.

If fuel is spilled during refueling, wipe it off from the engine immediately and
discard the rag in a safe place. Do not operate the unit if fuel or oil leaks
exist-repair immediately.

NEVER operate this equipment in an explosive atmosphere.

NEVER operate any gas powered equipment in a poorly ventilated or enclosed
area.

NEVER perform any work on the unit while it is running. Before working on it,
stop the engine and disconnect the spark plug wire to prevent accidental
starting.

Avoid prolonged breathing of exhaust gases.

Avoid contact with hot exhaust systems and engine parts.

Allow engine to cool before performing any repairs or service.

ALWAYS transport and handle fuel only when contained in approved safety
containers.

ALWAYS keep the area around the muffler free of debris such as leaves, paper,
cartons, etc. A hot muffler could ignite the debris and start a fire.
4