Subscribe to Our Youtube Channel
Related Manuals for HELLER HWF40P
Summary of Contents for HELLER HWF40P
- Page 1 Instruction Manual 40cm Wall Fan with Pull Cord Model: HWF40P READ AND SAVE THESE INSTRUCTIONS...
- Page 2 Please read and follow the instructions in this user manual even if you feel you are familiar with the product, and find a place to keep it handy for future reference. For your convenience record the complete model number (located on the product identification plate) and the date you received the product, together with your purchase receipt and attach to the warranty and service information.
- Page 3 • Do not plug this unit into an extension lead, double adaptor or power board. • Do not use the appliance for other than its intended use. • Do not use outdoors. FOR INDOOR USE ONLY. • This unit is not intended for use in bathrooms, laundry areas or similar moist indoor locations. Never locate the unit where it may fall into a bathtub, sink or any other water container.
- Page 4 FEATURES Blade Assembly (inside) Tilt Adjustable Operation Panel Getting to Know your Wall Fan Congratulations on the purchase of your new Wall Fan. Before first use of your new Wall Fan, it is most important that you read and follow the instructions in this use and care booklet, even if you are familiar with this type of appliance.
- Page 5 Before First Use Before use, remove all packaging and inspect the appliance for any damage. If there appears to be any damage, please take the unit back to place of purchase for a replacement. Assembly Instructions Your Wall Fan has been boxed unassembled to minimize packaging waste. Each part is designed to fit together and be disassembled easily for cleaning or storage.
- Page 6 Lift out all locking clips on the front safety grille (Fig. 3) (Fig. 3) Place the safety grille into position and secure it by fastening the clips over the outer rim. The screw and nut at the bottom of the grille must be fitted (Fig. 4). (Fig.
- Page 7 NOTE: If the power cord set of this appliance becomes damaged, discontinue use. Repairs should be undertaken only by a qualified technician. Specifications Model Description Voltage Frequency Wattage HWF40P 40cm Wall Fan with Pull Cord 220-240V~ 50Hz Australian Customer Service GAF Control (Sales) Pty Ltd P.O Box 19 Altona North Victoria 3025...
Need help?
Do you have a question about the HWF40P and is the answer not in the manual?
Questions and answers