Panasonic ER-GC20 Operating Instructions Manual page 10

Using
Using the clipper with the comb
attachment
• We recommend using the clipper in an ambient
temperature range of 0 - 35 °C. If used outside this
range, the appliance may stop operating.
1. Slide the power switch on the
main body to the "0" position to
turn off the clipper.
2. Make sure there is no damage to
the blade.
3. Insert the appliance plug into the
clipper.
4. Plug in the AC adaptor into a
household outlet.
5. Mount and adjust the comb
attachment to the required setting.
Adjusting the comb attachment
While pressing on the trimming
height adjustment button, slide
and adjust the comb attachment
so the mark ( ) aligns with the
desired trimming height.
• Actual hair length will be a little
longer than the height you set.
10
6. Slide the power switch on the main
body to the "1" position to turn on the
clipper.
Note
Power will not turn on while the sliding plate for
maintenance is open.
7. Cut hair to the correct
height by moving the
4
clipper back against the
1
flow of the hair.
3
• Do not use the clipper in an
inverted position. This can cut hair
too deeply.
Removing the comb attachment
1. While pressing on the
trimming height adjustment
button, slide the comb
attachment until it comes off
the main body.
Example: For 3 mm