Table of Contents
Advertisement
Camera
The Xoro TelePAD10A3 4G 4G features on the front and on the back each have a camera, the front
camera is mainly used for video calling and the back camera for Picture & Video recordings.
To start the camera press the icon
the front camera will start automatically.
When you have made all the settings for your recording, you can record your shot by tapping the
trigger (3).
To exit the Camera application, tap the icon
All photos and videos will be available immediately in the gallery application are available (page 24)
and can be edited, forwarded or deleted from there.
Notes:
•
By divergence or contraction of two fingers the image can be digitally zoom.
The best shots you can achieve by holding the TelePAD with both hands to the recording
from being blurred.
•
The camera focuses and exposes the image in most shooting situations automatically. For
this purpose, the device requires possibly a little moment, before you press the shutter button.
First Steps
in the program overview. With video telephony applications,
The following settings can be made in the camera
application:
1.
In the Camera Settings You can adjust various
camera parameters in general and the photo and
video recording, for example. The white balance,
exposure, or a color effect to add.
2.
video recordings
3.
taking photos
4.
Smart Filter function (eg panel, Mono, Sepia,
etc)
5.
Switch to panorama mode
6.
Facial Beautification mode
7.
Live-photo mode
8.
Switch to camera mode
9.
Detection by gesture: Automatic detection in
recognition of the gesture:
10.
Do not move unit while HDR capture
11.
Flashes
12.
Switch between the front / rear-side camera
in the bottom toolbar.
TelePAD 10A3 4G
15
Advertisement
Table of Contents
