Zanussi ZAF942F1W1 User Manual page 20

2. Touch the Inicio/Pausa
appliance door locks and starts the countdown
of the delay start. The display shows the
indicator .
When the countdown is completed, the programme
starts automatically.
Cancelling the delay start after the
countdown has started
To cancel the delay start:
1. Touch the Inicio/Pausa
appliance. The related indicator flashes.
2. Touch the Inicio Diferido button repeatedly until
the display shows
off.
3. Touch the Inicio/Pausa
start the programme immediately.
Changing the delay start after the countdown
has started
To change the delay start:
1. Touch the Inicio/Pausa
appliance. The related indicator flashes.
2. Touch the Inicio Diferido button repeatedly until
the display shows the desired delay time.
3. Touch the Inicio/Pausa
start the new countdown.
THE AUTOADJUST SYSTEM LOAD
DETECTION
The programme duration in the display
is referred to a medium/high load.
After touching the Inicio/Pausa
AutoAdjust System starts the laundry load
detection:
1. The appliance detects the load in the first 30
seconds. In the programmes where Flexi Time
is available, during this phase the Flexi Time
bars placed below the time digits play a
simple animation. The drum rotates shortly.
2. The programme duration could be adjusted
accordingly and could increase or decrease.
After further 30 seconds, the water filling
starts.
About 20 minutes after the programme
start, the programme duration could
be adjusted again depending on the
capacity of water absorption of the
fabrics.
20
button. The
button to pause the
and the indicator goes
button again to
button to pause the
button again to
button, the
The AutoAdjust detection is carried
out with complete washing
programmes only and if the
programme duration has not been
reduced.
The AutoAdjust System is not available
with all programmes such as :Lana/
Lãs, Aclarado/Enxag., Centrif. and
programmes with short cycles.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
When the programme is running, you can change
only some options:
1. Touch the Inicio/Pausa
The related indicator flashes.
2. Change the options. The given information in
the display changes accordingly.
3. Touch the button Inicio/Pausa
The washing programme continues.
CANCELLING A RUNNING PROGRAMME
1. Press the button On/Off to cancel the
programme and to deactivate the appliance.
2. Press the button On/Off again to activate the
appliance.
If the AutoAdjust System has
completed and the water filling has
already started, the new programme
starts without repeating the
AutoAdjust System. The water and
the detergent are not drained out in
order to avoid waste. The display
shows the maximum duration of the
programme, updating it about 20
minutes after the starting of the new
programme.
There is also an alternative way of cancelling:
1. Rotate the selector knob to the "Reset" position
.
2. Wait for 1 second. The display shows
Now, you can set a new washing programme.
OPENING THE DOOR - ADDING GARMENTS
If the temperature and level of the
water in the drum are too high and/or
the drum is still rotating you should not
open the door.
button.
again.
.