FP FPi 1015 Quick Install Manual page 2

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
interference to radio communications. Operation of this equipment in a
residential area is likely to cause interference, in which case the user will
be required to correct the interference at his own expense. Use only a
shielded interface cable to operate this equipment with a printer or other
peripheral device.
CAUTION: Changes or modifications to this equipment not expressly
approved by the party responsible for compliance (Francotyp-Postalia)
could void the user's authority to operate the equipment.
It is certified that this system complies with all applicable
Directives of the European Union.
All rights reserved. This guide may not be reproduced
in whole or in part in any fashion or stored in a
retrieval system of any type or transmitted by any
means, electronically or mechanically, without the
express, written permission of Francotyp-Postalia.
We have made every reasonable effort to ensure the
accuracy and usefulness of this manual; however, we
cannot assume responsibility for errors or omissions
or liability for the misuse or misapplication of our
products.
Due to our continuing program of product improve-
ment, equipment and material specifications as well
as performance features are subject to change without
notice. Your machine may not have some of the
features described in this book.
Francotyp-Postalia GmbH
Prenzlauer Promenade 28 · 13089 Berlin (Germany)
Freecall: +49 800 372 62 68
info@francotyp.com ·
FCC Compliance
fp-francotyp.com
P-FPXxXxx_EN; Rev. 00
11/2022
©2022 Francotyp-Postalia GmbH
International English Version