General; Introduction; Copyright; Revisions - Würth ORSY mat HX Operating Instructions Manual

1.1 Introduction

1.1.1 Copyright

© Würth Industrie Service GmbH & Co . KG
This document is copyright protected . The rights established by this, particularly those of translation, reprint,
extraction of illustrations, radio broadcast, reproduction in photomechanical or similar ways and storage in
data processing systems are retained, even in case of use of excerpts only . Würth Industrie does not provide
any declarations or guarantees regarding the content of these operating instructions and expressly rejects
acceptance of any responsibility for defect claims, including for implicit defect claims .
Furthermore, Würth Industrie reserves the right to update this publication and to make changes, without
entering into the obligation to inform each person of these changes .

1.1.2 Revisions

The text, images and data correspond to the technical status of the vending machine at the time of printing
these operating instructions . We reserve the right to make changes in the interest of further development .
Index Date
00 25/03/2021
01
02
03

1.1.3 Number of pages, document/complete

This document contains 44 pages . If you have all pages in consecutive order, your document is complete .

1.1.4 Software

Please note that these instructions apply to different vending machine models . Therefore, details may be
described that your vending machine possibly does not include .
This document describes the software version 2 .0 .4 (vending machine control: media module & CAN head) .
Differences can occur if you have installed another versions .
To read out the software version of the vending machine control, please log into the vending machine and
select "Information" in the vending machine menu.

1.1.5 Availability of the instructions

The operating instructions must be available to the user continuously to enable safe use . They must be kept
in an easily reached place in which they can be referred to at any time in the site where the machine is
used .

1.1.6 Scope

This document is for the following machine types:
• Master modules: HX Master (helix-based vending machine)
• Satellite modules: HX Satellite (helix-based vending machine)
This document can also be applied to the Satellite module variant without control system, which solely
consist of sales helixes .
24
1 GENERAL
Comment
Instructions created
Page(s)
all