Advertisement
> Keyboard Parameters Setting
•
in the standby status,
Figure 1:
press
Figure 2:
press (ill button
Enter:
after multi-keypad connect with host, should set keypad
Attention:
address in the keypad setting. It is unable to operate host with two same
address kaypads.
> Enroll RFID Card
•
Enter wireless Enrollment
Only enters wireless enrollment status can begin to enroll the RFID
tags.user can through the four buttons to control the keyboard.
([2]upturning, [B]scroll down, [4]Ieft-turn, [6]right-turn)
The ways of enter wireless enrollment: in disarm status, input
[programing
wirelesss enrollment.
in d
Figure 1:
input
Figure 2:
press(illbutton, enter wireless enrollment
Figure 3:
Disarm
Thursday
31/12/2020
Fi g ure 1
•
Enroll RFID Card
This keyboard suppo
enrollment , it means it has already enrolled before, the use
nea
r
enroll detecto
button for choice the parameters you need.then
[4]or[6]
Disarm
8888884
Flgure 1
password](Default:888888), then press(ill button.enter
i
sarm status
[programing password][O]
Enter:
16 : 14
t to enroll
r
.
r
input[program password][4][#]
Keypad Set
Address:01
Back
Figure 2
Disarm
8888880
Figure 2
8 RFID cards.If
03
♦
Enter
W i reless Enroll
1. Enroll Remote
2. Enroll Detector
♦
Back
Figure 3
✓"
there is a"
Enter
ma
k
r
re
r
Advertisement
