Page 1
OPERATING MANUAL STARK (D(I)G) 0CDCD Wired Keypad ST-305D • This product is a networking accessory that needs to be used with the company's gateway...
Page 2
Product Introduction > • The panel can be operated and programmed by the wired keyboard. The keyboard adopts dot-matrix liquid crystal, multi-language available. Zone information, status, alarm events etc can display in keyboard. Support The RFID swip type can be setup by "Arm/Dsiarm". 8 RFID cards, Keyboard built-in temperature sensor, real-time display of the field temperature, Fahrenheit and Celsius options.
Page 3
> Keyboard Parameters Setting • in the standby status, Figure 1: input[program password][4][#] press button for choice the parameters you need.then Figure 2: [4]or[6] press (ill button Keypad Set Disarm Enter: Address:01 ♦ Enter 8888884 Back Figure 2 Flgure 1 after multi-keypad connect with host, should set keypad Attention: address in the keypad setting.
Page 4
enter RFID card enrollment menu Figure 1: input to choose menu Figure 2: [4]or[6] "RFID Card No." input to choose menu, then press@] button Figure 3: [2]or[8] "Enroll" Wireless Enroll RFID Card 1 RFID Card 1 ◄ ► ◄ ► 2.