Table of Contents
Advertisement
Right
1. Novo button hole
2. Power button
3. Power light
4. Combo audio jack
5. USB (3.2 Gen 1) Type-A connector
(always-on)
Press the Novo button to open the Novo Button menu. From the
menu, you can choose to open the UEFI/BIOS setup utility, the Boot
menu, or the Windows startup options screen.
Press the button to turn on the computer or put the computer into
sleep mode.
• On: the computer is turned on.
• Off: the computer is turned off or in hibernation mode.
• Blinking: the computer is in sleep mode.
Connect headphones or headsets with a 3.5 mm (0.14 inch), 4-pole
plug.
Note: This jack does not support standalone external microphones. If
you use headsets, choose one with a single plug.
The always-on connector can charge external devices when the
computer is turned off, in sleep or hibernation mode. The always-on
function can be turned on or off in the UEFI/BIOS setup utility.
Note: If Lenovo Vantage is pre-installed on your computer, you can
also set always-on function from within that software.
.
Chapter 1
Meet your computer
5
Advertisement
Table of Contents
