Table of Contents
Advertisement
Positioning the system
The following illustration shows an example of
positioning the system. Note that the illustrations
in these instructions differ from the actual unit for
explanation purposes.
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position ( ).
A
F
A
A
D
Front left speaker (L)/
Place the front speakers to the sides of the
monitor or screen and as flush with the screen
surface as possible.
Center speaker: Place the center speaker above
or below the monitor or screen.
Rear speaker (L)/
Place these speakers behind your listening
position, facing slightly inwards.
Subwoofer: The position of the subwoofer is
not so critical, because low bass sounds are not
highly directional. But it is better to place the
subwoofer near the front speakers. Turn it slightly
toward the center of the room to reduce the wall
reflections.
Unit
DM7630-AU_DZAFLLK_ENG.indd 15
B
C
G
A
A
E
A
A
A
B
C
D
E
F
G
Front right speaker (R):
Rear speaker (R):
How to Attach the
Ferrite Core
You must affix a ferrite core in order to reduce or
eliminate electrical interference.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the power cord around the ferrite core
once.
3. Close the ferrite core until it clicks.
Connecting
15
2
2014-04-01
11:23:05
Advertisement
Table of Contents
