For The Electrician - Scotsman FME1204 User Manual

FOR THE ELECTRICIAN

Check the nameplate (located on the back panel)
for the voltage requirements, and for the minimum
circuit ampacity. The machine requires a solid
chassis to earth ground wire.
Connect the power supply to the wires leads in the
junction box on the back of the machine.
Connect the ice machine to its own electrical circuit
so it is individually fused. Voltage variation must
WATER COOLED
AIR COOLED
CONFORM TO ALL APPLICABLE CODES
NME954 & FME1204
remain within the limitations, even under starting
conditions.
All external wiring must conform to national,
state, and local electrical codes. The use of a
licensed electrician is required to perform the
electrical installation.
May 2001
Page 7
POWER
SUPPLY