Table of Contents
Advertisement
en Familiarising yourself with your appliance
If the cooking time is relatively long, you can switch
the appliance off 10 minutes before the cooking time
ends.
¡ There will be enough residual heat to finish cooking
the dish.
Remove any accessories that are not being used from
the cooking compartment.
¡ Accessories that are not being used do not need to
be heated.
Allow frozen food to defrost before cooking.
¡ This saves the energy that would otherwise be re-
quired to defrost it.
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
On certain models, specific details such as colour and
shape may differ from those pictured.
2
1
Display with setting ring
You can use the digital setting ring to set the
appliance via the display.
You will see the current setting values, options
or relevant information.
→ "Display", Page 8
2
Buttons
You can use the buttons to directly set various
functions.
→ "Buttons", Page 8
4.2 Buttons
You can use the buttons to directly select various func-
tions.
Button
Function
Switch the appliance on or off.
→ "Basic operation", Page 13
Select the microwave operating mode
directly.
→ "Microwave", Page 16
8
1
2
Switch off the display in the basic settings.
→ "Basic settings", Page 21
¡ Energy is saved when the display is switched off.
Heat two glasses or cups of liquid at the same time.
¡ Heating several dishes at the same time requires
less energy than heating dishes one after the other.
Note:
The appliance requires:
¡ A maximum of 2 W in networked standby mode
¡ A maximum of 0.5 W in non-networked standby
mode with the display switched off
Button
Function
Open the "Operating modes" menu.
→ "Operating modes", Page 9
Select the favourites operating mode
directly.
→ "Favourites", Page 20
Go back one setting.
Start or pause operation.
→ "Basic operation", Page 13
Select the timer.
→ "Setting the timer", Page 16
Press and hold for approx. 4 seconds
to activate the childproof lock.
→ "Childproof lock", Page 21
4.3 Display
The display is divided into different areas.
Digital setting ring
You can use the digital setting ring on the display to
change the setting values.
When you reach the minimum or maximum value avail-
able, this value remains on the display. If required, use
the setting ring to turn the value back again.
Finely tuned setting values
To fine-tune the setting values, e.g. to set a time to the
precise minute, press and hold the corresponding area
in the setting ring for around 1 - 2 seconds. The finely
tined setting values are shown in dots.
Status indicator
Status information is shown at the top of the display.
Symbol
Meaning
Timer is activated.
→ "Setting the timer", Page 16
Childproof lock is activated.
→ "Childproof lock", Page 21
The appliance door is locked due to the
cleaning function or childproof lock.
→ "Pyrolytic activeClean cleaning func-
tion", Page 25
→ "Basic settings", Page 21
Advertisement
Table of Contents
