For The Installer; Specifications - Scotsman FM2402 Service Manual

FM2402

FOR THE INSTALLER

The FM2402 is designed to fit
the following Scotsman storage
bins:
B90 and extensions
(with bin top KBT18)
BH800 no bin top required.
BH900 using bin top KBT14.
BH1360, no bin top required.
When installing a new system,
check to be sure that you have
everything you need before
beginning:
Correct Bin
Correct Ice Machine
Correct Bin Top (if required)
All kits, legs, and
information required for the
specific job.
The normal finish for the ice machine is
enamel-sandalwood. A stainless steel panel kit,
SPKFM42 may be field installed to convert the unit
to a stainless steel finish.
SPECIFICATIONS: ICE MAKER
Model Dimensions
Number
FM2402AE-32A 27" x 42" x 24"
FM2402WE-32A
FM2402AE-3A
FM2402WE-3A
BACK VIEW
Condenser Inlet (W/C):
3/8" FPT
TOP VIEW
Ice Chute
2.64" x 6.2"
Basic
Electrical
(w/o bin)
H X W X D
208-230/60/1
same same
same 208-230/60/3
same same
5.25"
9.5"
3"
14.9"
15.8"
18.74"
18.9"
Note: Allow 6" behind and
connections, and service.
Ice Condenser
Type
FLAKE
same Water
same
same Water
August 1993
Page 2
Electrical Inlet
Water Inlet 3/8" Flare
Drain 3/4" FPT
Condenser Drain (W/C):
13.84"
34.84"
6" above the unit for air
circulation, utility
Refrigerant Charge*
Type
Air Cooled 32 oz.
Air
Water
Cooled
Air
* Per system. Always go
by the nameplate.
1/2" FPT
6"
18.28"
R-22
28 oz.
R-22