Summary of Contents for HAMPTON BAY ASPENWOOD HDP00830
Page 1
THANK YOU We appreciate the trust and con dence you have placed in Hampton Bay through the purchase of this light xture. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase. NOTE: This light xture requires the use of six 120V, 60Hz, 60-Watt max., candelabra-base type B bulbs (not included).
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity Fixture Body (Pre-assembled on the xture body (A)) Socket (Pre-assembled on the xture body (A)) Glass Shade Chain (Pre-assembled on the xture body (A)) Switch (Pre-assembled on the xture body (A))
Installation - using power cord Hanging the chandelier Unpacking the light fixture □ Carefully unpack the xture and lay out all parts on a clean □ Adjust the height of the xture body (A) as desired and attach surface. the chain (E) to the hooks (KK). NOTE: If using power cord follow instructions below.
Page 6
Installation - using power cord (continued) Installing the glass shades Installing the bulbs □ □ Prior to installing the bulbs, inspect sockets for silica packets. Screw six glass shades (D) into the cups (B). If packets are present, then remove and throw away. Do not □...
Installation - hardwired Splitting the wires Unpacking the light fixture □ Carefully unpack the xture and lay out all parts on a clean □ Split the end of the wires 6 inches from the end. surface. □ Strip the plastic covers off the black and white wires about 1/2 NOTE: If wiring to an outlet box, follow instructions below.
Page 8
Installation - hardwired (continued) Connecting the wires Installing the cross bar □ Install the xture green ground wire (1) under the ground screw DANGER: Ensure the power is off at the main fuse box (EE) on the cross bar (BB). prior to beginning installation.
Page 9
Installation - hardwired (continued) Installing the bulbs Hanging the light fixture □ Prior to installing the bulbs, inspect sockets for silica packets. □ Push all excess wires into the outlet box. If packets are present, then remove and throw away. Do not expose to children or pets.
Page 10
Installation - hardwired (continued) Installing the glass shades □ Screw six glass shades (D) into the cups (B). □ Restore power and turn on the switch (F).
Care and Cleaning □ Clean the light xture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives. Troubleshooting Problem Possible Cause Solution □ The bulb is burned out. □ Replace the light bulb. The bulb will not light.
Page 12
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Need help?
Do you have a question about the ASPENWOOD HDP00830 and is the answer not in the manual?
Questions and answers