Table of Contents
Advertisement
8
END
indicator
REFRESH switch
Downloaded from:
https://www.usersmanualguide.com/
CHG. (charge) indicator
Marks
POWER
To AC outlet
indicator
REFRESH indicator
Hook on.
Push in.
BATT. RELEASE
GETTING STARTED
Power
This camcorder's 3-way power supply system lets you
choose the most appropriate source of power.
NOTES:
● No function is available without power supply.
● Use only specified power supply.
● Do not use provided power supply units with other equipment.
CHARGING THE BATTERY PACK
SUPPLY POWER
1
Connect the charger's AC power cord to a wall
outlet. The power indicator lights.
ATTACH BATTERY PACK
2
Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.
The CHG. indicator lights.
DETACH BATTERY PACK
3
When charging is completed, the END indicator
lights. Slide the battery pack opposite the direction
of the arrow.
BATT. PACK
CHARGE
BN-V11U
approx. 1 hr. 10 min.
BN-V12U
approx. 1 hr. 10 min.
BN-V22U
approx. 2 hrs. 10 min.
BN-V25U
approx. 2 hrs. 40 min.
USING THE BATTERY PACK
ATTACH BATTERY PACK
1
Hook its top end to the camcorder and push the
battery pack in until it locks in place.
DETACH BATTERY PACK
2
Slide BATT. RELEASE and pull out the battery pack.
RECORDING TIME
BATT. PACK
GR-AX710/AX510
BN-V11U
approx. 1 hr. (40 min.)
BN-V12U
approx. 1 hr. (40 min.)
BN-V22U
approx. 2 hrs. 10 min. (1hr. 20 min.)
BN-V25U
approx. 2 hrs. 50 min. (1hr. 50 min.)
( ): when the video light is on (GR-AX710 only).
**REFRESH
The AC power adapter features a REFRESH function that allows
you to fully discharge the battery pack before recharging.
To discharge the battery . . .
..... attach the battery pack to the adapter as shown in the
illustration to the left. Then push REFRESH. The REFRESH
indicator lights when discharging starts, and goes out when
discharging is complete.
DISCHARGE
approx.
3 hrs. 30 min.
approx.
3 hrs. 30 min.
approx. 7 hrs.
approx. 10 hrs.
Advertisement
Table of Contents
