Table of Contents
Advertisement
1
Getting Started
General Maintenance
N O TE
22
Repair or service which are not covered in this manual should only be
performed by qualified personnel.
To remove the dirt or moisture the USB device, follow the
instructions below.
1 Power off the USB device and remove the AC/DC adapter cord
and USB cable from your device.
2 Remove your USB device from its plastic casing by pulling at
the bumper (front end of the casing) outward direction. Then,
lift the plastic body casing and remove it from your USB device.
3 Holding your USB device, shake out any dirt that may have
accumulated on the panel of your USB device.
4 Wipe your USB device with a dry clean cloth.
U2600A User's Guide
Advertisement
Table of Contents
