You'll Need These; Connecting To Other Devices - Sennheiser ADC1 Instruction Manual

3. Remove the old wax guard.
Insert the receiver into
opening #1. Press it until
you hear a click, then
remove the receiver from
opening #1.
4. Install a new wax guard.
Insert the receiver into
the opening #2. Press it
until you hear a click, then
remove the receiver from
opening #2.
5. Replace the eartip onto the
receiver.
For additional tips for care and
maintenance, visit
www.sennheiser-hearing.com/alldayclear/support
To purchase additional wax guards, visit
www.sennheiser-hearing.com/alldayclear
40 | All-Day Clear

You'll need these

Enhance and get the most of your All-Day Clear hearing
aids with these important and helpful accessories.
www.sennheiser-hearing.com/alldayclear
Eartips (domes)
•
Wax Guards
•
TV Connector
•

Connecting to other devices

The TV Connector allows you to wirelessly connect
your All-Day Clear hearing aids to your TV or other
audio source.
TV Connector (optional accessory)
Adjusting volume balance
between the TV and the
sounds in your environment
To adjust the volume of
the TV while wearing your
hearing aids:
Push the upper part of the
•
push button to increase the
TV volume and decrease the
volume of sounds in your
environment.
to purchase:
TV TV
volume volume
down up
Left ear Right ear
All-Day Clear | 41